Comes with fursuit head, hand paws, and a stuffed tail!

Comes with fursuit head, hand paws, arm sleeves with adjustable harness, detachable super-motion tail, and indoor feet paws!

All my fursuit heads (2027+) are constructed on a 3D-printed TPU base, come fully lined, and feature: plush minky maw, poseable/swappable tongue, follow-me eyes (with neodymium magnets), pickable nose hand-sewn over a TPU core, minky/felt detailing (lips, whisker dimples, eyelashes), sewn-on neck, heat vents, and optional fursuit hair/mane styling. The adjustable nylon-webbing harness inside the head has a quick-release buckle and a bit of elastic too, making it easier to put on and take off.

GOT GLASSES? Well I have some good news for you.. I also need them to see and my frames are massive, so all of my heads automatically are glasses-friendly.

Hand paws are lined and feature: stuffed minky beans (puffy paw style), sturdy claws sewn onto a TPU core, hidden finger escapes, and finished cuffs with left/right tags. The finger escapes are on the thumb, fore, and middle fingers (unless specified).

Feet paws are fully lined inside and feature: stuffed minky beans (puffy paw style), sturdy claws sewn over a TPU core, and finished cuffs with left/right tags. Thick EVA foam is used for the inner sole to provide structure for the TPU toes/heel to attach to.

Arm sleeves are fully lined inside with finished cuffs, feature an adjustable nylon+elastic harness (with quick-release buckle) to link one sleeve to the other across your shoulders. They also have attachment points at the wrist to keep them flush with your hand paws~

This style of tail is packed with polyester fiber fill and features loops of nylon webbing on a minky base to thread a belt through. Depending on the size of the tail, I’ll broaden the base to distribute the weight evenly and/or add support for kidney belts.

For tails sized large or extra-large (floor-dragger), the stuffing is removable via a hidden zipper along the bottom for easier travelling.

This style of tail features a segmented TPU core flanked by lengths of elastic that allows it to naturally move/bounce around as you walk, and is easily detachable! This is most useful during convention panels, where sitting comfortably while a tail is attached to your bum is a challenge.

If you’re worried about tail thieves or are busting some serious moves, you can lock the tail to the base too as-needed with the industrial-strength velcro strap.

Simple wings are patterned and sewn over a TPU core as a connected piece and flap/move with shoulder movements. The included adjustable nylon+elastic harness features a quick release buckle and wings themselves can be detached while keeping the harness on under your outfit. Also come with a hidden strap to keep them closer to your body while navigating high-traffic areas, such as the Dealer’s Den.

Poseable wings are also patterned+sewn over a TPU base and share all the features of simple wings above: adjustable nylon-elastic harness, easily detachable, hidden strap. The distinction is that these wings have braided wire installed at every joint.. allowing them to be posed!! Very cool indeed~

Price gets you three emotional states (e.g. angry, sad, half-lidded; custom requests allowed) and 1 fully-closed state. Eyelids are 3D-printed in ABS/PETG and feature doubled-up neodymium magnets that provide excellent hold, stiff 2mm-thick felt eyelashes, left/right labels, contact handle, and color-coded backs for easier swapping while suited-up.

The fully-closed eyelids have a narrow strip of black eye-mesh, so you’re not completely blind.. but still exercise caution and have a handler with you, if possible.

Trying to wear a hat or other headgear while suited? Or maybe you’d like your vision to be unobstructed by fluffy fursuit hair? This add-on is the elegant solution! Swappable bangs come with both a furred no-bangs (optional hair part detail) version in addition to the with-bangs one. Same as the eyelid sets, both panels are installed with neodymium magnets to hold them securely in place.

This is something that I've done 2-3 times now, and learned from MugiwaraCosplay and TwilightKnights via purchased tutorials! You get a fluffy mane made of many individual tufts and/or hand-weft sections that moves with you!

INCLUDES: high-quality fur brush with epoxy tips, smaller cat brush (unshielded), rat-tail comb, medium bottle of scentless fursuit spray, small bottle of Folex textile cleaner, color-matched thread, sewing needles, seam ripper, measuring tape, jack-o-lantern pincushion, straight pins, safety pins, and hand-sewing guide.

Everything comes in a Hallowyeen Patchworks carrying case to keep your fursuit care supplies together and organized!

This adds the detachable functionality that comes standard on Super-Motion Tails! Mechanism is printed in TPU+PETG and both panels are finished with color-matched minky.

100% traditional, hand-made art created by yours-truly with alcohol and acrylic markers on super smooth 110LB/160GSM mixed-media paper. Badge comes laminated with your fursona name, species, and handle printed clearly on the patterned cardstock backing.

Also includes a free lanyard and clear pouch to house your con badge, and/or stickers plus business cards for easy distribution~

Styled to look like sneakers/boots with a clear vinyl at the toe, these slide over your feet paws to stop any dirt, mud, and other outdoor debris from damaging your soft beans. Each pair is custom fit, themed to your fursona, and are secured closed using industrial-strength velcro; laces are decorative and even replaceable.

The inner sole is made of 1cm-thick EVA foam, with the outer sole being rubber (with tread/tooth) for good traction while navigating the outdoors. Go wild.. literally!

A collapsible storage tote to keep your fursuit head and parts in when you’re not currently wearing them! Features a clear vinyl panel with small vents on the front, Hallowyeen Patchworks logo on the top, privacy screen, rigid interior siding, and zipper pouches to organize additional supplies or convention swag.

The back of the tote is padded and features adjustable straps, which allow you to even wear it as a backpack for easier travel!

Want to revisit the creation process for your fursuit from concept art to the final photo shoot? I can gather up all the WIP (work-in-progress) photos, select the best ones for printing, and organize them all into a physical album for your viewing pleasure.

Price can vary depending on the number of photos and album size.

QUESTIONS? You can reach me most easily either via DM (direct message) on Bluesky(@hallowyeen), FurAffinity(@fluffgator), Discord(@hallowyeen), Telegram(@fluffgator) or via email.

BE RESPECTFUL. I’m an artist with physical and mental disabilities that can impact my ability to be productive! Please be kind and understanding when working with me. If something comes up that affects my turnaround time, I'll mention it in #fursuits-updates and do my best to reach out via email or Discord.

ZERO HATE SPEECH. The following will not be tolerated when interacting with me and will result in an immediate termination of the Commission, as well as blacklisting: toxic/abusive behavior, racism, religious speech, bigotry, and ANY homo/transphobia whatsoever.

ANTI-AI CREATOR. I'm strongly against Generative AI and refuse to work with anyone that supports it or NFTs or any of the latest, exhausting tech bro future-faking scam! The world is worse off because of this shite. I also will NEVER consent to my art being used to train data models, full stop. Support Human Artists!! 🧠🚫🤖

AGE POLICY. You must be OVER 18 for me to make you a Fursuit, no exceptions! Even if discussed with a parent/guardian. If I find out that you've lied about your age, your Commission will be cancelled with no refund provided. I’m an artist that also does freelance NSFW art, so this is a necessary precaution.

NO REFERENCE SHEET? No problem, I can make one for you! I offer a generous 50% discount for all Fursuit Clients who need one, and it includes all the views needed for the project. If you've read this far, please include the word “dragons” in the notes of the application.

PET ALLERGY WARNING. Although my workshop is based in the garage, I cannot guarantee that projects will be 100% free from dog hair. Please don't pick me as your Fursuit Maker if you're severely allergic to dogs. I do take precautions to limit contamination (wash hands often, disinfect all fursuit parts with 70% isopropyl alcohol, and aggressively blowdry), but it's not a perfect process. I also have active filtration in the workshop.

SMOKE-FREE WORKSHOP. All smoking is done OUTSIDE the home. While I don’t smoke cigarettes, I do use cannabis (flower & joints) to manage my chronic pain & fibromyalgia symptoms. Hands are thoroughly washed afterwards to ensure that unwanted scents don't transfer to any Fursuit Parts.

ELECTRONICS. To synth species that require programmable LEDs and electric components: I'm not at a point as a Maker where I can reliably install onboard things like eye glow LEDs, body LEDs, or speakers. I’m still learning how to install head fans and simple LEDs, which can connect to a power bank.

NO DINO MASKS. I also won't work off of a Jurassic Park raptor/dino mask.

NO MOVING JAW. While I currently have a Client that has requested a moving jaw, I don't think I’ll be offering it as an add-on for future projects. This may change now that Fursuit Heads are 3D printed TPU+PETG.. but testing is required. If you still REALLY WANT this feature for your head, please be aware that the add-on is experimental and you'll get a partial refund if yapping ain't happening.

COPYRIGHTED CHARACTERS. I’m open to making suits whose species come from a show, movie, or video game! The character must be visually distinct from how they appear in the Copyrighted Content, whether that be unique colors/markings or added features (horns, different eye color). Basically the Fursuit you’re commissioning must be identifiable as your own Original Character.

ALMOST ANY SPECIES! Every new project begins with sketch studies of both your Fursuit species and the character themselves! This helps me pin down the shapes before I start sculpting the head base in Blender. You can learn more about my current creation process in #fursuits-3D.

PRE-SCULPT DISCOUNT. Have I sculpted this species before? Then I can offer a slight discount on your quote. The only exception is if the face shapes you want/need for your Fursuit are very different from a previous example or they are a hybrid. In that case, I would need to do a brand new sculpt and won't be able to offer a discount.

MATERIALS. All Fursuit Parts are now 3D printed in-house with TPU and PETG! I go into a lot of detail in #fursuits-pricing about what materials go into each Fursuit Part. I’m working on adding an easy-to-browse table of my go-to suppliers and purchased patterns, but it isn’t ready as-of-writing (10/2026): #fursuits-credits. Please don’t hesitate to ask me about my design process, I love talking about my work!

SIZING & MEASUREMENTS. Most things I offer will need you to take various measurements to make sure the finished project will fit you perfectly. The patterns I use for hand and feet paws are pretty universal, but if you have large hands and/or feet I may need to adjust them. Please feel free to include your shoe size, and a scanned tracing of your hand for points of reference. And check out my #fursuits-measuring for more info and a guide for how/what I'd need you to measure. To prove you've read up till now, include “are just big” to the notes.

ALLOW SOME DESIGN FLEXIBILITY. Some colors don’t exist in faux fur, minky, PETG, or otherwise from the manufacturers I order supplies from. If this is the case for your character, I’ll work with you to match colors as closely as I’m able and order additional swatches to compare with those I have on-hand. The more fur colors and complex markings (spots, stripes, etc) are in your character design, the more expensive the quote.

SIMPLIFY MARKINGS. This can help bring the cost of the quote down substantially! Re-iterating here that I offer a 50% Discount on Reference Sheets for ALL Fursuit Clients. I’m more than happy to work with you on how we can simplify the design. Once I’ve begun work on the Fursuit (color matching, sketching, sculpting), no further design alterations will be possible.

REQUEST A QUOTE. Thankyou for considering me to bring your character to life!! To get started, you'll need to fill out my Application Form (linked up top). This includes: digital reference sheet of the character (minimum of front, back, side, mouth detail, paw detail, and eye detail for symmetrical design; both sides for asymmetrical), rough location (for shipping estimate), desired add-ons, valid PayPal or Stripe account for invoicing, and proof of ownership of the character (commissioned artworks, charahub profile, toyhouse page, etc). If the design was purchased as an Adopt, I’ll reach out to the Artist to confirm ownership that way too.

PAYMENT. I process payments for Fursuit work through PayPal or Stripe invoicing ONLY. All invoices are payment-plan enabled, so you can pay for your Fursuit over time. The first payment is a Non-Refundable 30% Deposit, and this money is used to order the high-quality materials/supplies needed to complete the project. Subsequent payments are according to an agreed payment schedule of 12+ months and are due on the 15th of every month, unless otherwise discussed.

LATE FEE. Missed payments have a $50 late fee added to the next month's scheduled payment, so please make sure to send them on-time. If your payment is late 2+ months in a row, you’ll lose your position in the Work Queue to the person behind you.

WAITLIST & WORK QUEUE. Once I’ve accepted your Application, you’ll be added to my Waitlist while payments are made on the Commission. Once you’ve made 4 on-time payments (including the 30% deposit), you’ll be moved to the Work Queue and you can start receiving updates on your order! I use Trello to keep my queues organized & transparent.

REFUNDS. You have 90 days from the date of your deposit to request a refund. If work has already begun on the Fursuit (sketching, color-matching, 3D sculpting, printing), the associated costs/value will be subtracted from the refund amount, as well as any payment processing fees from Paypal/Stripe. You must provide a reason for the cancellation for my records and acknowledge that I'm allowed to keep, refurbish, and/or sell the cancelled work as a pre-made. This is the secondary reason for the 30% deposit being non-refundable, since I will need to order additional materials to do the refurb. Refunds are only provided in the event that fabric (fur & minky) hasn’t been cut.

DEADLINES. I cannot guarantee any Commission to be finished by a specific date (anniversary/birthday, holiday, convention, etc) if there are others ahead of you in my Work Queue. I prioritize and ship projects in the order they’re received, and I don’t accept any additional payments to "rush" your order, so please be patient. If you are first or second in line and the desired delivery date is more than 3 months away, I MIGHT be able to work with that. This is barring any unexpected health issues or my fibromyalgia flaring.

REPAIRS & WARRANTY. Your Fursuit comes with a 30-day Limited Warranty from the date of arrival to their final destination. This covers popped seams, sizing adjustments, and adhesive failure. If damage occurs and adjustments are needed, please contact me immediately to arrange for a fix. Commissioned works must be returned to me in a very clean and like-new condition, free of stains and body odors. And you’re responsible for covering the additional shipping costs.

SHIPPING. When it is time to ship your order, I’ll ask for your full address and prepare a separate invoice with the total cost of shipping plus insurance. I typically go through the US Postal Service, and will insure the package equal to the original Fursuit quote, at-minimum. If I include any free experimental goodies, their value is also covered under the insurance for the package. After the shipping invoice is paid, please allow 1-2 weeks for me to physically get to the Post Office with your box. I’ll provide the Tracking Number via email and Discord/Telegram after I’ve handed them off in-person, usually within the same business day.

MAINTENANCE GUIDE. For tips on how you can keep your costume clean and beautiful for many years to come, refer to #fursuits-careguide. Don't forget to include “cats with wings!” in the notes.

WHAT’S IN THE BOX?!! The inside of the box is lined with bubble wrap, and I use balled up packing paper (recycled and eco-friendly) in any voids surrounding your items. Here’s a breakdown of what you can expect: your completed Fursuit Commission wrapped in 2-3 layers of plastic to protect from moisture during transit (desiccant packs inside Head/Paws), physical print-out of the Maintenance Guide in a presentation sleeve, labeled swatch card with swatches of all the faux fur & minky that was used (suppliers provided), and an organza bag with my business cards.. plus a handful of candy, of course. If you’re getting a Fursuit Care Kit with your order, the spray will be in its own sealed bag separate from everything else too. Early batches can expect to get free goodies tossed in there too.. :3

FAIR-USE PHOTOGRAPHY. I’m allowed to use any SFW photos of the finished suit for use on my website, cross-posting to social media, and creating adverts to announce openings. Full credits to the photographer will be provided, of course, as well as the preferred social media page of the suit’s owner. This is to help me build up visual examples of my works, as well as keep track of Fursuit Family in the event of future meetups.

RESELLING. I acknowledge that economic circumstances can change and a Fursuit may need to be sold in order to make ends meet. Please reach out to me so I can keep track of the change in ownership, as well obtain the contact information for the Fursuit’s new owner. You may re-sell commissioned heads/parts for a maximum of 80-90% the quoted cost of the Fursuit when it was brand-new. If the suit has undergone wear and tear from frequent use, price your listing accordingly.

RIGHT TO MODIFY. I reserve the right to alter, update, and/or rewrite my Terms of Service as-needed to best reflect my business practices.

FURSUIT HANDLERS. If you plan to be suiting in public non-convention settings, having a close friend to help spot you and ensure your safety is pretty vital. A Fursuit Handler’s main job is to help be your eyes and ears while you’re all suited up, since almost all Fursuits will severely impair your ability to be 100% aware of your surroundings. They can warn you of nearby ledges, stairs, other pedestrians, and more.. including making sure you hydrate, take breaks to cool off, and help you take photos. Fursuiting is somewhat of an extreme endurance sport, so ease into it with shorter sessions at first, and always call ahead to ask if Fursuiting is allowed at a location (e.g. shopping malls, stores, etc) if possible.

NO HANDLER? If you can't find someone that's willing to be your Handler, I recommend joining your local Furry Discord to find out what events are happening in your area AND find strength in numbers when public suiting. Those organizing a meetup will typically have already asked for permissions from the venue/location.

INSPECTING YOUR SUIT. Every time you've finished an outing with your Fursuit, give it a thorough inspection and write down anything that needs repairs. Check for any popped seams, dirty/messy fur, and anything else that could postpone/prevent your next suiting session. Fixing things as they’re noticed also helps make sure that your Fursuit is always ready for your next adventure.

THINGS TO AVOID DOING. Here’s a brief rundown of the leading causes of Fursuit damage. This section is specifically geared towards first-time suit owners.

EXCESSIVE HEAT. Leaving your Fursuit in a hot car can heat it over 120°F, which melts the hot glue holding the suit together, causing seams to burst, eyes to fall out, and foam structures to warp. Other heat sources that can cause permanent damage: clothes/hair dryers, heat guns, open flames.

MOISTURE / IMPROPER STORAGE. Never store your Fursuit in a sealed bag or box if it is still sweaty/damp/wet. This creates the perfect conditions for mold growth, which can destroy your Fursuit and create a health hazard for the wearer. Storing your Fursuit parts in a squashed state – such as vacuum sealable bags – can permanently deform the foam structure and bend/stretch faux fur fibers.

CLEANING MISTAKES. Never dry clean your Fursuit! It can often ruin faux fur, adhesives, and damage the foam base itself. Also avoid using harsh chemicals like bleach, it’ll damage the fur and eat the foam.

STRETCHING / ROUGHHOUSING. Hanging soaking-wet, heavy Fursuit parts on a thin hanger can permanently stretch the fabric and distort the shape. And intense physical activity, such as rolling on rough ground, can cause severe, unrepairable matting, torn fur, or broken structural components. Not to mention you can accidentally injure yourself and/or others which on its own could cut convention experiences short.

FURSUIT HYGIENE. Whenever you wear your Fursuit, you’re going to sweat buckets. And bacteria/mildew love warm, damp, dark environments with little ventilation.. especially if there's a porous surface to attach to, such as upholstery foam or TPU!

2 SHOWERS PER DAY. Keeping clean by showering before and after suiting, plus using deodorant, sharply reduces the amount of bacteria & odors you'll transfer to your suit.

THE 6-2-1 RULE. You'll probably hear other convention-goers referencing this, so here's what it means: 6 hours of sleep per night, 2 meals per day, and minimum of 1 shower before sleep. These numbers are lower limits!

ATHLETIC UNDERGARMENTS. Wearing body coverings, such as moisture-wicking balaclavas and undershirts both creates a physical barrier and helps cool you off by drawing moisture away from your skin. Also plan to have a couple spare sets, so that way you can easily swap to fresh under armor before your next session.

FURSUIT SPRAY. If you don't have any on-hand or ran out of the spray included in the Fursuit Care Kit, you can almost always find someone in the Dealer's Den that is selling Fursuit Spray (70% isopropanol alcohol + water + fragrance oil) in a wide variety of scents. You can also purchase it online from several different sellers or make your own (1:1 mixture of 70% alcohol + cold water + couple drops of fragrance oil - NOT essential oils).

WHAT IS CON CRUD? This is a slang term that refers to cold/flu symptoms, sinus infection, or other respiratory illnesses that folks can catch after attenting large fan conventions (such as fur cons) or music festivals. Thousands of people from different geographic regions gathering in confined spaces exposes everyone to a mix of unfamiliar germs. This combined with late nights partying, high stress, travel fatigue, and dehydration lowers your body's natural defenses. Below are some ways to help prevent it:

Wash your hands frequently with soap and hot water, especially before eating.

Avoid sharing drinks, utensils, or unsealed snacks whenever possible.

Prioritize sleep and stay hydrated!! Both are very important to helping your immune system. And in the specific case of fursuiting, you're sweating a lot and drinking water helps to keep heat exhaustion at bay.

POST-CON DEPRESSION. This is another thing that convention-goers sometimes experience either in-combination with Con Crud or on its own. It's a temporary emotional and physical slump that happens after attending a fan convention, festival, or other large event. Below are some of the reasons it can occur and what can help:

EXHAUSTION. Long hours of walking, standing, sub-par nutrition, and poor sleep puts a lot of stress on your body. Poor sleep can be from either staying up too late night after night, or simply having trouble sleeping in an unfamiliar place. Getting at least 6 hours of sleep and 2 complete meals (not only snacks) per day/night of the event helps to offset this.

SOCIAL WHIPLASH. A weekend of high social excitement and sensory stimulation followed by a return to the everyday can sometimes result in poor mood at home. Talking with friends you made at the con, sharing photos, making soft plans for your next convention, and prioritizing self-care once you get home often helps.

FINANCIAL SHOCK. Realizing how much money was spent on tickets, travel, and merch can sink in following the con and leave some feeling stressed/depressed. Careful budgeting, prepaid cards, and paying for the hotel+travel using credit (via your bank or something like Affirm), help set a hard limit on what can be spent at the convention.

RECHARGE YOUR BODY ASAP!! Even with taking precautions, conventions simply take a lot out of a person, regardless if you're suiting or not! Take the day after you return home from the event off from work/school to sleep and decompress. Talk to friends, share photos, and/or dive into a low-pressure hobby - like gaming, drawing, organizing con swag - helps ease the transition. And, of course: hydrate, eat whole foods, and work to get back on a regular sleeping schedule.

LEARNING TO HAND-SEW. This is an invaluable skill as a Fursuiter, and allows you to quickly repair your costume on-the-go. The Headless Lounge – a dedicated space for Fursuiters and their handlers – at furry conventions usually is stocked with basic sewing supplies like needles and thread for use on a first-come basis. But I highly recommend you purchase a small sewing kit or assemble one of your own to keep on-hand regardless. Here’s the stitches that are going to be the most useful to you:

SECURE YOUR THREAD. Always remember to secure your thread at least 2-3 times at both the beginning and end of your stitching. You should also repeat this every 5-6 stitches to avoid having to redo all your work in the disheartening event of your thread snapping.

DOUBLE-UP YOUR THREAD. Unwind an arm's length of thread, pass one end through the eye of the needle, and pull it all the way through until both ends are at an equal length. This provides additional strength to your stitches and helps prevent thread snaps.

RECOVERING FROM SNAPPED THREAD. If the snap occurred close to the end of your thread, carefully pull out the last few stitches you made to get enough length to secure the thread. Continue with a new length of thread from your spool.

LADDER / INVISIBLE STITCH. The ladder stitch (or invisible/blind stitch) is a hand-sewing technique used to close seams, linings, or openings in plush toys and pillows, appearing invisible from the right-side out. By sewing horizontal, parallel stitches across a gap it creates a "ladder" that, when pulled, seamlessly hides the thread.

BLANKET / WHIP STITCH. This is a versatile stitch that creates a looped edge, traditionally used to finish raw edges of fabric to prevent fraying. But it’s also used for securing thick materials.. like faux fur, so many Makers swear by it.

BACK STITCH. This basic stitch creates a solid line along the allowance (the distance of the thread from the edge of the fabric), mimicking a machine-sewn seam. By moving the needle backward to the start of the previous stitch on the top side, it secures fabric firmly in place.

DISINFECTING & DRYING. To disinfect your suit, I recommend using a 50/50 mixture of 70% isopropyl alcohol and cold water in a spray bottle. Thoroughly spray the inside of your head, hand paws, and anywhere sweat would have made contact, then air-dry everything until it’s completely dry. The process of the alcohol drying is what kills the bacteria. I recommend the below setup if you’re on a tight budget:

FURSUIT HEAD. Place your head on top of a clean box fan (no accumulated dust on the fan blades) and crank it up to MAX. Set up the 2nd box fan perpendicular to the first.

HAND / FEET PAWS. Then place hand/feet paws with the opening facing the forward airflow of the 2nd box fan. Make use of spare tubing as a spacer to ensure the air is circulating inside.

ARM SLEEVES & TAIL. Once no longer dripping wet, these can be hung to dry normally via strong hangers in a dry, well-ventilated area.

SPOT CLEANING STAINS. Folex is a useful product used to clean carpets and stuffed toys. This makes it ideal for cleaning faux fur too. Spray it onto the stain and a little of the nearby area, and then use your fingertips – or a clean/designated soft-bristle toothbrush – to gently scrub the spot. Then take a dry cloth and apply pressure to absorb the liquid. Repeat as-needed to get heavier dirt out. To remove any residual Folex, you can use a damp cloth to gently wipe the area, then use a dry one to wick away any remaining moisture. Folex is safe to leave unrinsed, as well.

BRUSHING & STYLING. Brushing the faux fur of your Fursuit is essential for maintaining their crisp look, and helps prevent the fibers from matting or kinking over time. Try to avoid excessive/frequent brushing when the faux fur is dry, as this can thin it out and cause bald spots; and always lightly spray with your 70% isopropyl alcohol mixture or watered-down hair conditioner (see below) before doing any brushing. This helps the fibers to keep their shape once dry.

PROTECT EYE MESH! Ball up some paper towel and place in the eyes to protect the paint from the isopropyl alcohol. Puddles of Fursuit Spray can eat through the sealer over time and it often takes some of the paint with it! If your head has removable eyes, pop them out of your head before styling with sprays.

GET A HIGH-QUALITY SLICKER BRUSH! While the basic wire-toothed slicker brushes (often found in pet stores) are good enough if you’re gentle, I highly recommend you get a nice brush with epoxy ball-tips. In my experience, the bare wires on a cheap slicker brush can pull out faux fur from the backing, leading to thinning and bald spots.

FOLLOW THE GRAIN. Always brush in the natural direction the fur flows. Go from the nose toward the back of the head, and from the base of the ear to the tip, etcetera.

FLUFFING. The exception to the above is when you want to add volume. You can do this by brushing very lightly against the grain, and/or pulling the brush upward at the end of a stroke.

CONDITIONER & TREATING MATS. For stubborn knots, create a mixture of 1:3 of hair conditioner and water in a spray bottle (e.g. ¼ cup conditioner, ¾ cup cold water, mix well). Lightly mist the area to lubricate the fibers before you brush. Start at the tips and slowly work toward the base in small sections to avoid ripping out the fibers as much as possible. Once detangled, set up a box fan a few feet away and brush in the direction of the fur to restore its original volume.

GOT2B GLUED BLASTING FREEZE SPRAY. Often used by cosplayers to create crisp stylized wigs, this hairspray is compatible with synthetic fibers and will freeze them in place once dry. It involves applying the spray directly to the fibers, shaping them with your fingers (use gloves) and/or a fine-toothed comb, and allowing it to completely dry. The end result is a stiff, lasting hold that creates crisp tufts and eliminates the need for frequent brushing. The spray dissolves in water too, so you can easily remove and redo a styling later on using Fursuit Spray.

HOW TO WHITEN TEETH. Fabric teeth will get dirty eventually, whether by sweat/saliva from inside your head, or simply dust. Whenever cleaning the teeth, be gentle to avoid damaging/popping seams. Never use harsh chemical cleaners like bleach, as it can eat away at your fabric and has harmful fumes.

LINT ROLLER. It's a useful tool to remove pet hair from clothing, and it serves the same function here. Always do this first before any of the following methods, as it will lift any loose surface fibers from the teeth.

FOLEX / SPOT SHOT. This is the same as spot cleaning, but take care not to damage stitches with rough scrubbing. If the stain remains, repeat the process, or try another method. Be sure to rinse the area with a damp cloth and allow the teeth to completely dry before using another solvent afterwards.

HYDROGEN PEROXIDE. Dab peroxide onto the teeth with a washcloth or clean/designated toothbrush to break down the stain. You can allow it to sit for a few minutes, which will help lift stubborn grime away from the fabric. Then rinse the surface with a damp washcloth dabbed in cold water, following up with a dry cloth to pat/squish the teeth to wick away any remaining moisture.

BAKING SODA PASTE. Create a thin paste using baking soda and a small amount of water. Use a cotton swab to carefully apply the paste to the teeth; avoid getting it on the lips and gums. Leave it for some time, then remove it with a damp cloth.

DEEP CLEANING. Spot-cleaning is insufficient to keep your suit fresh longterm, especially if you’ve been suiting every day of a Furry Convention and didn’t have much downtime to disinfect your costume. It's considered best practice to deep clean at least once between conventions, both to prevent yourself getting sick and to avoid spreading Con Crud. For all the steps below, use cold water ONLY; hot/warm water can melt faux fur fibers. Woolite is the recommended detergent to use, as it’s the most gentle on synthetics.

FURSUIT HEAD. Protect the eyes with clear packing tape on both the outside and inside of the head before proceeding. Fill a container/bucket with water and a small amount of laundry detergent. Then using a clean towel, soak it in the soapy mix and sponge the inside of your head, wringing the water in – remember to avoid the eyes as much as you can. Rinse everything out by grabbing a fresh towel, soaking it in fresh detergent-free water, and sponging the inside to wash out the detergent. Repeat this rinsing step until ALL soap has been flushed. This is very important, as any leftover detergent can damage faux fur! Gently squeeze the excess water out of the foam, then grab a dry towel to sponge off the remaining water until it is no longer dripping. Follow up with disinfecting & drying.

HAND/FEET PAWS & ARM SLEEVES. Fill a bathtub a third of the way with water and a small amount of laundry detergent. Soak thoroughly – this is often affectionately referred to as making Fursuit Soup. Soak for a few minutes, then drain the tub and gently squeeze excess soapy water from all costume parts. Refill tub with fresh water and soak again to rinse all the detergent off. Repeat as-needed until there's no longer any soap residue in the water. Squeeze out as much of the excess water you can, then lay parts flat on a clean dry towel. Use a second dry towel to squish/sponge away remaining moisture. Follow up with disinfecting & drying.

TAIL/WINGS. Since these parts don't make direct contact with your skin when worn, spot-cleaning and disinfecting should be sufficient. For wings, the adjustable harness can be removed and washed by hand in a sink. Most tails have a foam core, so following the washing method for your Fursuit head is recommended. Extra-large tails also have stuffing in the lower half, which can hold onto moisture, so take extra care to sponge it all out with dry towels and lots of squishing. Follow up with disinfecting & drying.

BLISSEL LITTLE GREEN. If you plan on owning multiple suits and/or want a simpler deep cleaning process, I can't give enough praise for this tool. It's a compact upholstery washer/vacuum with a nozzle that both dispenses and sucks up liquid. Highly recommend it for super easy Fursuit upkeep!

QUESTIONS? You can reach me most easily either via DM (direct message) on Bluesky(@hallowyeen), FurAffinity(@fluffgator), Discord(@hallowyeen), Telegram(@fluffgator) or via email.

BE RESPECTFUL. I’m an artist with physical and mental disabilities that can impact my ability to be productive. Please be kind and understanding when working with me. If something comes up that affects my turnaround time, I'll mention it in Art Updates and do my best to reach out via email or Discord/Telegram to keep you informed.

ZERO HATE SPEECH. I won’t tolerate any of the following: rude/abusive messages, racist or religious remarks/advice, LGBTQIA+ hate, and supporting pedophilia/zoophilia. The first time I’ll give you a warning. The second time results in blacklisting and your Commission being cancelled without a refund.

ANTI-AI CREATOR. I'm strongly against Generative AI and refuse to work with anyone that supports it or NFTs or any of the latest, exhausting tech bro future-faking scam! The world is worse off because of this shite. I also will NEVER consent to my art being used to train data models, full stop. Support Human Artists!! 🧠🚫🤖

AGE POLICY. You must be OVER 18 to commission me! I will not accept a quote request from a minor whatsoever, even if discussed with a parent/guardian. This is to protect everyone involved, since I also do NSFW works semi-frequently. If I find out that you've lied about your age, your Commission will be cancelled and partial refund provided.

NSFW/KINK. I'm open to doing NSFW and kink-related art as long as it is something I would enjoy drawing. Contact me to discuss before filling out an application, please.

REQUEST A QUOTE. Please browse my available Commission types and their Add-ons via #digiart-catalog or through my Ko-fi Store! Once you have an idea of what you'd like to order, you can fill out an Application Form or purchase a slot on Ko-fi.

NO REFERENCE SHEET? No problem! While a reference sheet or existing art examples of the character are preferred, I'm more than capable of working from a written description. If you have a very specific outfit that you'd like them to be wearing, please provide links to their listings/images.

PAYMENT. I process payments through PayPal/Stripe invoicing, or my Ko-fi Store. This offers the best protections for both Client and Artist when doing business online. Once your Application has been reviewed, I'll send you an email to let you know if it's been approved/denied. If approved, please be ready to pay! Doing so locks down your position in my Trello queues.

PAYMENT PLANS? If the total cost of the Commission exceeds $60, I require a minimum payment of at least 30% to add you to my Work Queue. The quote for the Commission must exceed $60-100 to qualify for a payment plan, via Paypal/Stripe invoicing ONLY. Until a Commission is fully paid for, only rough sketch/composition related updates will be provided.

RETURN CLIENT DISCOUNT. I absolutely love working with past Clients! Return customers get a 15-20% discount off of Custom Commission slots, YCH Auction/Sale is exempt unless it exceeds $100. If we've worked together before, mention it in the notes section of my Application Form.

WAITLIST & WORK QUEUE. I utilize a Trello Board to keep track of both my Digital Art and Fursuit customers, which you can find here. I work on Commissions in the order they are received and paid for, and work often progresses in large passes (i.e. if I'm sketching, everyone gets sketch updates). And if my Commissions are currently "Closed" or "Limited", feel free to email me and I can add you to my Art Waitlist on Trello while we discuss the details.

REFUNDS. I can provide full refunds ONLY within 30 days of your purchase, minus transaction fees. If I've already begun working on your Commission, the refunded amount will be minus the cost for the current progress of the piece. Please allow 3-4 days from the date of a refund approval for processing the payment. I'll be in close communication with you via email to ensure you get your refund in a timely manner.

CHARGEBACKS. Please give me a chance to talk with you BEFORE you resort to this. I'm a low-income artist (disabled, on Social Security Income) and taking this course of action is extremely harmful to my physical/mental well-being. If progress images (WIPs) or the finished Digital Art Commission has been delivered, issuing a Chargeback for any reason without notification is invalid, breaks my Terms of Service, and will result in permanent blacklisting. You'll also be reported to my payment processors as a scammer.

ARTIST CREDIT. Always credit me when reposting Commissioned art! You can link to my #digiart-catalog, Bluesky(@hallowyeen), or FurAffinity(@fluffgator). I definitely prefer if the link is functional, but name only credit (e.g. PFP by Hallowyeen/Fluffgator) is acceptable for icon cropping and related uses.

PERSONAL USE ONLY. All Commissions are licensed for Personal Use, unless Commercial License is purchased! As the Artist, I hold the rights to the completed work(s) and may use it however I like, such as: posting to my online galleries/socials, using the art to create adverts, and similar uses. Contact me via email if you're interested in licensing a Commission for Commercial Use. Ballpark rates are ~50-100% of the cost of the Commission.

CHARACTER SALES. This is the exception to the above, as long as the Commission is bundled with other works of the character being sold/traded. The value of the Art should reflect the quoted amount for the Commission or my current pricing, which is always available in my #digiart-catalog.

DIGITAL GOODS. All transactions for Digital Art Commissions are for digital images only! No physical items are to be shipped, unless explicitly stated in the invoice (printed/laminated badges, art prints, etc).

BE RESPECTFUL. I'm an artist with physical & mental disabilities. Please be kind and understanding. Refer to #art-updates for anything affecting my turnaround time.

ZERO HATE SPEECH. Don't be a garbage person. First offence gets a warning. Second offence results in blacklisting and the Commission being cancelled without refund.

ANTI-AI CREATOR. I will NEVER consent to my art being used to train data models.

AGE POLICY. You must be OVER 18 to commission me! Lying results in Commission cancellation without refund.

NSFW/KINK. I'm open to doing NSFW and kink-related art if it matches mine. Contact me.

REQUEST A QUOTE. Please refer to #digiart-catalog for types and examples. You can choose to fill out an Application Form or purchase through my Ko-fi Store.

NO REFERENCE SHEET? No problem! I can work from a written description. Link specific outfit references, if applicable.

PAYMENT. PayPal/Stripe invoice or Ko-fi Store ONLY. Please be ready to pay. If Commission costs $40+, 30% of total amount is due upfront. If Commission costs less than $40 or is from a "YCH Auction/Sale", total amount is due on invoice receipt. Until Commission is fully paid, only sketch/composition WIPs are provided.

WAITLIST & WORK QUEUE. I use Trello for Commissions: #queue! Commissions worked on in the order received and fully paid for. If slots are "Closed", email me to join Waitlist.

REFUNDS. Limited 30-day full refund policy, minus transaction fees. Allow 3-4 days for processing. If Commission started, refunded amount is minus cost of current progress. Exceeding 30 days and work has begun, I cannot provide refund.

CHARGEBACKS. Please do not issue a chargeback without first discussing with me. If Commission has progress or is finished/delivered, issuing a Chargeback without notification is invalid. Scammers recieve blacklisting and reporting to payment platform.

ARTIST CREDIT. Always credit me when reposting Commissioned art! You can link to my #digiart-catalog and/or my Bluesky at: https://bsky.app/profile/hallowyeen.com.

PERSONAL USE ONLY. As the artist, I hold the rights to the completed Commission and may use it however I like. Email me if interested in Commercial Use licensing.

DIGITAL GOODS. No physical items are to be shipped, unless explicitly stated in the invoice (printed/laminated badges, art prints, etc).